[100-Yen Shop Shrink Plastic Follow-Up] Comparing Daiso and Seria Shrink Plastic Sheets by Thickness

previous articleI’d like to continue by comparing the thickness differences between Daiso and Seria shrink plastic sheets!

Hello, I’m Kanahina☆

Today I found a new 0.15 mm shrink plastic sheet at Daiso, so I’m going to compare the differences in thickness!

The shrink plastic sheets people often use are probably 0.2 mm or 0.3 mm, but I had never found a 0.15 mm sheet before, so I’m excited to try it 😊

I also had a 0.4 mm sheet that I had bought earlier but never used, so I’ll bake that one as well.
I bought my 0.4 mm sheet at Seria, but Daiso also had 0.4 mm sheets for sale!
By the way, the 0.15 mm and 0.2 mm sheets used this time are Daiso products, while the 0.3 mm and 0.4 mm sheets are Seria products.

The 0.15 mm shrink plastic sheet I found this time is B4 size, the same as the 0.2 mm sheet.

I’ll also place a link below to the shrink plastic sheets I usually buy on Amazon.

Amazon is recommended if you want to buy at a good price!

Now, let’s start baking them!

I found a new 0.15 mm shrink plastic sheet at Daiso

Here are the shrink plastic sheets before baking: 0.15 mm, 0.2 mm, 0.3 mm, and 0.4 mm.
Sorry they are a little hard to see because they are transparent.

And here they are after baking!!

Here are the shrink plastic sheets after baking

The 0.4 mm sheet is seriously distorted!!
Actually, the first 0.4 mm sheet distorted so badly that I baked another sheet of each thickness, but both 0.4 mm sheets turned out the same way.
The 0.3 mm Seria sheet baked cleanly, so perhaps thicker sheets are more likely to distort.

Let’s also look at the thickness after baking!

Let’s look at the thickness after baking

0.15 mm → 1 mm
0.2 mm → 1.5 mm
0.3 mm → 1.8 mm
0.4 mm → 2 mm
That was the result.

There may be some differences depending on how they are baked, but after baking, the 0.4 mm sheet was about twice as thick as the 0.15 mm sheet 😊

Summary

The 0.15 mm sheet had little distortion after baking and was easy to bend, but I’m concerned about its strength for larger pieces such as keychains.

The 0.15 mm sheet seems useful for small pieces or three-dimensional work, so it would be good to choose the thickness depending on the project 🎶
For larger pieces such as keychains, I think 0.2 mm or 0.3 mm sheets will be more stable!

Amazon is recommended if you want to buy shrink plastic sheets at a good price!

If you buy shrink plastic sheets online, Amazon is recommended.
A pack of 10 can sometimes be cheaper than buying at a 100-yen shop, so I often buy them on Amazon.
They arrive quickly, and if you have Amazon Prime, shipping is often free.

Please click below and take a look if you’re interested 😊

Amazon is recommended if you want to buy at a good price!